Cuplock 1 Board Bracket
Board brackets are used at the edge of a scaffolding to extend the reach
or extension off of any side of the scaffolding where sunshade comes.
1' CupLock Vertical (0.5M)
Standards are the vertical members of Cuplock scaffolding. They provide the vertical support for scaffolding.
Cuplock Clamp On Leg
Clamp on leg to be used to take out one additional vertical between two verticles.
Cuplock 2 Board Side Bracket
Board brackets are used at the edge of a scaffolding to extend the reach
or extension off of any side of the scaffolding where sunshade comes.
25" Deck Adapter
Deck adapter is used to hold the ledger / horizontals which is fitted at top. Example of use: In cuplock scaffolding system to create dance floors.
Cuplock Caster Adapter
The caster adapter is used as a base connection point to a caster and provides a base rosette to begin scaffold construction. This adapter is used only for Cuplock Scaffolding. This will connect to a 12" system caster to enable your scaffold tower to roll.
Cuplock 3 Board Side Bracket
Board brackets are used at the edge of a scaffolding to extend the reach or extension off of any side of the scaffolding where sunshade comes.
Cuplock Adjustable Caster Adaptor
The adjustable caster adapter is used as a base connection point to a 12" System Caster for mobile cuplock towers. It allows for 18" adjustability as well as a base rosette to begin scaffold construction.
12" Caster Wheel With Brake
The scaffold caster is used as a rolling base. It allows the scaffold to be moved to different locations without disassembling the scaffold.
20' CupLock Horizontal Truss
Cuplock Trusses are horizontal members of Cuplock scaffolding that allow for with more load compare to ledgers.
21' CupLock Horizontal Truss
Cuplock Trusses are horizontal members of Cuplock scaffolding that allow for with more load compare to ledgers.