Welded Reinforcing Mesh From 3-12 mm Reinforcing Rebar

Reinforcing welded wire mesh are made from reinforcing wire, located in two mutually perpendicular directions and connected at the intersection of resistance spot welding.

Advantages

Welded reinforcement mesh is made by welding, which does not disturb the structure of the metal. It is easier to move and laid in concrete, and reinforcement mesh just holds its shape and mesh.

Specification of welded reinforcing mesh:

• Diameter of reinforcing rebar: 3-12 mm.
• Reinforcing rebar wire distance: 100, 150 , 200, 250, 300 , 400 and 500 mm.
• Mesh size: 50 × 50, 100 × 100, 150 × 150, 200 × 200 mm.
• Mesh sheet width: 0.5-2.4 m.
• Mesh sheet length: 1-12 m.
• The most popular mesh sheet size: 2 m × 6 m, 2 m × 3 m, 2 m × 4 m.

Our company also has the ability to produce reinforcing mesh according to customer drawings.

Application of reinforcing welded wire mesh:
Reinforcing mesh is used to increase the structural strength of reinforcing concrete structures and asphalt. Creation of the inner frame reinforcement for concrete structures can provide a high level of performance . Reinforcing mesh is also used for other purposes, such as:

• Building. Welded mesh reinforcement is widely used for reinforcement of concrete structures. In this case, inside poured concrete forms (under the slab, frame foundation slab is poured) laid welded reinforcing mesh, which serves to increase the strength of formed concrete structures.
• Making frames.
• Reinforcement of road surfaces or parking areas, so welded reinforcing mesh called road reinforcing mesh grid (5-6 mm).
• Manufacture of various fences.
• Used as Masonry mesh (3-4 mm wire).
• Used as coal mine supporting mesh for coal mine roadway supporting.

Technical point: as armature construction, welded mesh reinforcement is laid with a slight overlap. Therefore less useful area maps by about 10% than its geometrical dimensions.