Knitted Wire Mesh

Stainless Steel 304, 309, 310, 316, 321 Inconel 600 and 601 and Monel 400

Wire Diameters of 0.006”, 0.008”, 0.0095” and 0.011”

  • Service Temperature up to 2000°F
  • Corrosive Resistant
  • Extremely Durable
  • Available and Economical
Download Data Sheet PDF
Description:
At ACS, we are the world’s largest vertically integrated knitted wire mesh manufacturer. Our process of supplying knitted wire mesh is based on our expertise in the industry. First, we knit our mesh into a tubular form, then flatten it into continuous lengths, and finally roll it up for packaging.
 
Uses:
Our knitted wire mesh for removable and reusable insulation is designed for fabricating removable and reusable insulation blankets.  Due to its flexible composition, our mesh retains and protects insulation while conforming to highly irregular surfaces.  This allows our mesh to withstand the stresses of repeated installations, vibration, buffeting moisture, corrosion and temperature extremes. As a result, our mesh is excellent for aerospace, commercial, industrial and marine pad construction.
 
Dimensions:
The standard knit of our insulation mesh at 8 stitches per inch of width and 6-8 courses per inch of length. Additionally, we also offer our knitted wire mesh in the following dimensions.
 
Diameters
  • 0.006″
  • 0.008″
  • 0.0095″
  • 0.011″
Widths
  • 6″
  • 8″
  • 10″
  • 12″
  • 18″
  • 24″
  • 30″
  • 36″
  • 38″
  • 42″
 
We supply our mesh in either a flat or a crimped (corrugated) form. Please note that crimped mesh yields approximately 20% less coverage (see chart below).
 
Recommendations:
 Below is a list of our recommendations based on various knitted wire mesh needs.
  • For maximum strength and temperature, we recommend the 0.0095” and 0.011” wire diameters.
  • For applications that are either sewn or require less frequent replacement, we recommend the 0.008” wire diameter.
  • For maximum flexibility, we recommend the 0.006” wire diameter.
  • For extremely high temperature applications, we recommend the crimped mesh. Although it is reduced in coverage, the crimped mesh allows for a slight air gap in extremely high temperature applications as well as counteracts the tendency of the material to toll back when cut.
  • For exhaust applications, we recommend versions 309 and 310 in Stainless Steel.
 
Physical Properties:
 
Note: The below temperatures are based upon oxidizing environment and typical values. Results may vary depending on specific technical requirements of each applications.
ALLOY TEMPERATURE RANGE WIRE DIAMETER PER SQ FT
1-PLY FLAT		 PER LB
2-PLY FLAT
304 Stainless 900°F Continuous
1200°F Intermittent		 0.011″ 13.0 6.5
304 Stainless 900°F Continuous
1200°F Intermittent		 0.0095″ 17.0 8.5
304 Stainless 900°F Continuous
1200°F Intermittent		 0.008″ 24.0 12.0
304 Stainless 900°F Continuous
1200°F Intermittent		 0.006″ 39.0 19.5
309 Stainless 1650ºF Recommended for exhaust applications
310 Stainless 1850ºF Recommended for exhaust applications
321 Stainless 1200°F Continuous
1500°F Intermittent		 0.011″ 13.0 6.5
321 Stainless 1200°F Continuous
1500°F Intermittent		 0.0095″ 17.0 8.5
Inconel 600 & 601 2000°F 0.011″ 11.8 5.9
Inconel 600 & 601 2000°F 0.008″ 21.8 10.9
Monel 400 1000°F 0.011″ 11.2 5.6

Contact Us