Top>Seismic Isolation and Vibration Control>For Bridges>OILES LRB (Multilayer Natural Rubber-Type Seismic Isolation Bearing with Lead Plug)

OILES LRB (Multilayer Natural Rubber-Type Seismic Isolation Bearing with Lead Plug) Lead Rubber Bearing

Features/Structure/Basic Characteristics/The Function of Multi-Layer Rubber, Lead Plug/Durability of Rubber Bearing/Example of Installation/Basic Characteristics Verification Test

Features

  • Can satisfy the requirements for stable performance of bearings by supporting loads and allowing elongation and rotational absorption over a long period of time.
  • Customizable dispersion ratio of horizontal force during an earthquake will allow the bridge design to be more reasonable.
  • Maintenance is easier compared with steel bearings.
  • Simpler structure provides with ease of replacement work.
  • LRB performance can be flexibly designed according to the size and the characteristics of the structure by adjusting the size of the lead plug.

Structure

Cure adhesion multilayer rubber bearing with alternately piled up rubber and steel plate.

Basic Characteristics of the LRB (Multilayer Rubber)

The Function of Multilayer Rubber/ Lead Plug

The Function of Multilayer Rubber

1. The steel plate reinforced rubber will firmly support the structure. (Load supporting and rotational absorption function)

High rigidity in the vertical direction as compared to the single rubber provides with the stable support of the structure.

Transform the seismic vibration into a slow movement. (Horizontal Elasticity Function)

Softness in the horizontal direction will calm down the severe seismic vibration and make it a long-period vibration of the structure.

3. Returns the structure to the original position (Restoration function)

The restoration force of the rubber will return the structure to the original position after the earthquake terminated.

The Function of Lead Plug

4. Damps the severe vibration of structure. (Vibration damping function)

The Lead Plug will be plastically deformed along with the deformation of multilayer rubber to absorb the seismic energy, quickly damps the vibration, and controls the displacement due to the earthquake as well.

5. Depresses the vibration other than the earthquake (Trigger function)

High rigidity of the lead plug will hold the structure until the external force becomes as high as a certain level to prevent the vibration due to the traffic vibration or the strong wind.

The Durability of Rubber Bearing

The elevated railway bridge in Australia (Melbourne) built in 1889 using the natural rubber (single layer) for a countermeasure to the vibration/noise is considered as the oldest still existing practical example of rubber bearing for the bridge in the world.

As a full-fledged application of multilayer rubber bearing, the use for Pelham Bridge (steel bridge) in UK (Lincoln City) is considered as the first practical example. After that, the multilayer rubber has been a share of bridge bearing until today.

On the other hand, the oldest example in Japan is the chloroprene multilayer rubber bearing used for Kinugawa Bridge for Tohoku Main Line in 1961, and this bearing is still in use with no problem over 40 years after installation.

Elevated Railway Bridge (Melbourne)
Installed in 1889

Kinugawa Bridge
Installed in 1961

Examples of Installation

LRB can be applied to the wide variety of bridges, such as concrete bridges and steel bridges.

Basic Characteristics Verification Test

A great number of basic experiments and confirmation of property are being made to prove the performance of rubber bearings.

Contact Us

To make an inquiry about the OILES CORPORATION's Seismic Isolator and Vibration Control, click here

Lead rubber bearing